Pipes and fittings
5/5
WELCOME
TO OUR STORE
Specifications:
⭐ Maximum liquid temperature: 35°C
⭐ Maximum ambient temperature: 35°C
⭐ Power supply: 230 V
⭐ Insulation class: B
⭐ Operating mode: continuous
⭐ Safety: IP68
⭐ Working position: vertical
⭐ Max. number of starts per 1h: 20
⭐ Max. immersion depth: 100
⭐ Engine speed: 2850 RPM
Multistage submersible pumps with a diameter of 90 mm, with increased resistance to sand, designed for installation in wells with a minimum internal diameter of 100 mm. The pumps are used to supply water to single- and multi-family houses, farms, as well as to power irrigation systems (sprinklers, drip lines) and drainage.
Features:
⭕ Increased resistance to sand
⭕ PZH certificate
⭕ Highest quality materials
⭕ Thermal protection built into the motor winding
⭕ Capacitor built into the motor (no need for an external starting box)
⭕ Warranty 24 months
⭕ Warranty and post-warranty service
Specifications:
⭐ Maximum liquid temperature: 35°C
⭐ Maximum ambient temperature: 35°C
⭐ Power supply: 230 V
⭐ Insulation class: B
⭐ Operating mode: continuous
⭐ Safety: IP68
⭐ Working position: vertical
⭐ Max. number of starts per 1h: 20
⭐ Max. immersion depth: 100
⭐ Engine speed: 2850 RPM
Materials:
✔️ Suction / pressure connection: brass
✔️ Housing: AISI 304 stainless steel
✔️ Shaft and rotor: AISI 304 stainless steel
✔️ Rotor: noryl
✔️ Diffuser: noryl
✔️ Mechanical angina: Ceramic/Sic/NBR
✔️ Engine: oil-cooled
⚡ The pump is distinguished by its durable construction, corrosion resistance and the ability to draw water in which there are small amounts of sand. This is possible thanks to the use of high-quality materials, stainless steel and special floating rotors.
⚡ The pump is designed to take cold and clean water. Its small size (diameter 90 mm) makes it possible to mount in virtually any well hole. Despite its size, the pump is very efficient. Under good operating conditions, it is able to take about 105 liters of water per minute.
⚠️The entire chamber and main bearing is cooled and lubricated with oil.
⚠️ The oil used to lubricate the bearing is safe and non-toxic. This is a very important feature, because the use of such oil allows the use of a pump in wells from which water is drawn for food purposes.
⚠️ The IBO 3.5 SDM 3/18 pump has a very robust construction made of proven materials. Most of the components, including the housing, pump shaft and clutch, are made of stainless steel.
Status | New |
---|---|
Brand | IBO DAMBAT |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent