WELCOME 

 TO OUR STORE

SUBMERSIBLE PUMP 3,5" SDM 3-15 90M 105L/MIN 230V

Category Pump EAN 5903111344931 SKU 3,5" SDM 3-15 In stock 6 Items
Sold: 24
Gross
zł717.21
Sold: 24
Gross
0/5

Specifications:


⭐ Maximum liquid temperature: 35°C


⭐ Maximum ambient temperature: 35°C


⭐ Power supply: 230 V


⭐ Insulation class: B


⭐ Operating mode: continuous


⭐ Safety: IP68


⭐ Working position: vertical


⭐ Max. number of starts per 1h: 20


⭐ Max. immersion depth: 100


⭐ Engine speed: 2850 RPM


Share on:

Multistage submersible pumps with a diameter of 90 mm, with increased resistance to sand, designed for installation in wells with a minimum internal diameter of 100 mm. The pumps are used to supply water to single- and multi-family houses, farms, as well as to power irrigation systems (sprinklers, drip lines) and drainage.


Features:


⭕ Increased resistance to sand

⭕ PZH certificate

⭕ Highest quality materials

⭕ Thermal protection built into the motor winding

⭕ Capacitor built into the motor (no need for an external starting box)

⭕ Warranty 24 months

⭕ Warranty and post-warranty service

Specifications:


⭐ Maximum liquid temperature: 35°C


⭐ Maximum ambient temperature: 35°C


⭐ Power supply: 230 V


⭐ Insulation class: B


⭐ Operating mode: continuous


⭐ Safety: IP68


⭐ Working position: vertical


⭐ Max. number of starts per 1h: 20


⭐ Max. immersion depth: 100


⭐ Engine speed: 2850 RPM


Materials:


✔️ Suction / pressure connection: brass


✔️ Housing: AISI 304 stainless steel


✔️ Shaft and rotor: AISI 304 stainless steel


✔️ Rotor: noryl


✔️ Diffuser: noryl


✔️ Mechanical angina: Ceramic/Sic/NBR


✔️ Engine: oil-cooled

⚡ The pump is distinguished by its durable construction, corrosion resistance and the ability to draw water in which there are small amounts of sand. This is possible thanks to the use of high-quality materials, stainless steel and special floating rotors.


⚡ The pump is designed to take cold and clean water. Its small size (diameter 90 mm) makes it possible to mount in virtually any well hole. Despite its size, the pump is very efficient. Under good operating conditions, it is able to take about 105 liters of water per minute.



⚠️The entire chamber and main bearing is cooled and lubricated with oil.


⚠️ The oil used to lubricate the bearing is safe and non-toxic. This is a very important feature, because the use of such oil allows the use of a pump in wells from which water is drawn for food purposes.


⚠️ The IBO 3.5 SDM 3/15 pump has a very robust construction made of proven materials. Most of the components, including the housing, pump shaft and clutch, are made of stainless steel.

In contrast, the suction body (engine connector with hydraulics) and the discharge connection are cast from brass.

Specyfikacja

StatusNew
BrandIBO DAMBAT
Comments (0)