WELCOME
TO OUR STORE
SEPARATOR AIR POLLUTANT FILTER 1'' DN25 XSTREAM VENT-CLEAN MAGNETIC F-11062 FLAMCO
Gross
zł699.48
Sold: 90Gross
0/5
Technical Specifications
- Minimum / maximum working pressure: 0.2 / 10 bar.
- Minimum/maximum operating temperature: -10°C / 120°C.
- Suitable for refrigeration systems up to 50% glycol concentration.
- Minimum/maximum flow rate: 0.2 / 3 m/s.
- pH of the medium: 5 / 10.
- Material: EPP insulation. λ: 0,036 W/m.
- Average insulation thickness: 20 mm.
Attributes
- Separator Type: Air / Pollution
- Suitable for heating Yes
- Suitable for cooling Yes
- Nominal Inside Diameter 1" (25)
- Construction length [mm] 110
- Article compression stepPN 10
- Surface Protection Raw
- Suitable for open system No
- Suitable for closed system Yes
- With shut-off valve Yes
- With removable filter No
- Filter mesh density [mm] 0
- With automatic breather Yes
- Maximum medium temperature (continuous) [°C] 120
- Integrated auto refill: No
- Inlet / outlet distance [mm]: 0
Share on:
PROMOTION!!! T-SHIRT FLAMCO FREE !!
(sizes L - XL)
FLAMCO XStream Vent-Clean
XStream FLAMCO air and pollutant separators provide lower energy consumption, lower consumption, fewer faults, longer service life and thus higher efficiency of heating and cooling systems. An effective combination.
From the point of view of installation, it is always preferable to install a separate air and pollution separator. In installations where it is difficult to install both XStream Vent and Clean FLAMCO devices, the XStream Vent-Clean FLAMCO is the ideal solution.
Unique ECO/MAX mode.
- Unique ECO/MAX mode.
- In ECO mode, part of the installation water (partial flow) is routed through the XStream separator FLAMCO .
- In MAX mode, all installation water is directed through the separator FLAMCO XStream.
- Up to 15% less energy consumption in the heating system.
- *Up to 6% more heating efficiency.
- *The device has the ability to rotate 360 degrees for easy installation.
- It is not necessary to bear in mind the flow direction in the installation This prevents errors in assembly.
- Insulation is an integral part of the XStream FLAMCO design. This reduces heat loss to a minimum.
- An integrated service indicator indicates when the system was last vented in MAX mode.
Technical Specifications
- Minimum / maximum working pressure: 0.2 / 10 bar.
- Minimum/maximum operating temperature: -10°C / 120°C.
- Suitable for refrigeration systems up to 50% glycol concentration.
- Minimum/maximum flow rate: 0.2 / 3 m/s.
- pH of the medium: 5 / 10.
- Material: EPP insulation. λ: 0,036 W/m.
- Average insulation thickness: 20 mm.
Attributes
- Separator Type: Air / Pollution
- Suitable for heating Yes
- Suitable for cooling Yes
- Nominal Inside Diameter 1" (25)
- Construction length [mm] 110
- Article compression stepPN 10
- Surface Protection Raw
- Suitable for open system No
- Suitable for closed system Yes
- With shut-off valve Yes
- With removable filter No
- Filter mesh density [mm] 0
- With automatic breather Yes
- Maximum medium temperature (continuous) [°C] 120
- Integrated auto refill: No
- Inlet / outlet distance [mm]: 0
B: 181 mm
C: 181 mm
D: 121 mm
E: 53 mm
F: 45 mm
K: 114 mm
M: 110 mm
N: 16 mm
Ø: 41 mm
Q: ---
R: 130 mm
DN: 25 (1" inch)
Specyfikacja
Status | New |
---|---|
Brand | FLAMCO |
EAN (GTIN) | 8712874110625 |
Manufacturer's code | 11062 |
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent