WELCOME
TO OUR STORE
Safety group DHW BSB, Nmax UDT 111,5 kW
Gross
zł306.06
Sold: 2Gross
0/5
Share on:
Action
If the pressure in the domestic hot water preparation system does not exceed 6 bar, the MSW safety valve, which is part of the BSB safety group, remains closed. An increase in pressure above the valve activation value causes the movement of its diaphragm and exposure of the passage enabling the removal of excess medium from the system and at the same time lowering the pressure to the appropriate (safe) value. The pressure at which the valve will open is set at the factory and amounts to 6 bar. The knob located at the very top of the MSW safety valve allows temporary manual opening of its passage at a pressure lower than the pressure of the safety valve in order to check its correct operation.
Purpose of the device
The BSB safety group is used to protect domestic hot water installations with a capacity not exceeding 111.5 kW and a maximum storage volume of up to 200 l. The group is equipped with a connection to an expansion vessel with a capacity of up to 25 l, a safety valve MSW protecting against pressure increase in the system over 6 bar, a manometer for pressure control.
Device description
The body of the BSB safety group is made of brass. The safety group has a mounting bracket for attaching it to the wall with dowels and screws. The unit is designed for diaphragm vessels with a capacity of up to 25 l and a diameter of not more than 320 mm. The safety group is available with a quick coupler (Art.-No. 90 621 00) and without a quick coupler (Art.-No. 90 620 00
Technical Specifications
- Dimensions - 295 x 154 x 88 mm
- Power of the protected installation according to UDT - max 111.5 kW according to UDT
- Diaphragm vessel connection - GW 3/4" / quick coupler GW G3/4"
- Connection to the installation - GW 3/4"
- Pressure gauge range - 0 ÷ 10 bar
- Safety valve opening pressure - MSW 6 bar
- Pressure gauge dial size - Ø63 mm
- Smallest inlet duct diameter d safety valve - MSW 13 mm
- Discharge coefficient for vapours and gases α the MSW safety valve - 0,37
- Discharge coefficient for liquid αc of the MSW safety valve -0.31
Specyfikacja
Status | New |
---|---|
Brand | AFRISO |
EAN (GTIN) | 5902510001704 |
Manufacturer's code | 9062000 |
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent