ROOM CONTROLLER WHITE ST-297V3 TECH

Wired regulator ST-297 v3

Two-state temperature controller ST-297 v3 is a modern device used to manage a heating device. It allows convenient control and editing of room and floor temperature with an accuracy of 0.1°C.

Colour - Black

Product description

• room temperature control +/- with an accuracy of 0.1°C
• hysteresis in the range of 0.2 to 8 °C
• manual program
• day/night program
• momentary display backlight
• control by floor temperature (when using a floor sensor)
• Wired communication
• voltage-free contact NO-COM-NC (current capacity 1A/230V/AC)

Controller equipment:

• built-in room sensor
• Battery operated (batteries included)
• flush-mounted in a 60mm box

Dimensions: 84 x 84 x 13 mm

A.

• Batteries 2xAAA 1,5V

B.

• Voltage-free contact.

C.

• Floor temperature sensor

Principle

The flush-mounted temperature controller is designed to maintain the set temperature in the room. For this purpose, it sends a signal to the heating device or strip with information about the need to heat up to the required temperature. Upon receipt of such information, the heating device shall be turned off. The wired temperature controller can work in day/night mode or manual mode.

Modernity and aesthetics

The ST-297 v3 regulator is a small and ultra-thin device. It is only 13 mm thick, which makes the flush-mounted temperature controller adhere well to the wall and fits perfectly into the modern interior design. The readable screen makes it easy to read the parameters, and the extremely sensitive touch buttons make them quickly edited. The possibility of locking the buttons allows you to protect against changing parameters on the two-state temperature controller, e.g. by children. The device is available in two color versions

Floor temperature sensor

The two-state temperature controller allows you to measure and control the floor temperature after extension with a floor sensor. Control is carried out by sending a signal to the actuator management strip about the need to heat the floor to the indicated temperature. The user's task is to set the maximum and minimum floor temperature.