WELCOME
TO OUR STORE
MH 1300INOX 400V HYDROPHORE PUMP WITH ACCESSORIES
Gross
zł791.96
Sold: 2Gross
0/5
Parameters:
Maximum capacity: 100 l/min
Maximum lifting height: 55 m
Motor power: 1.45 kW
Voltage: 400 V
Pressure connection: 1'' x 1''
Share on:
USE:
The MH1300 INOX PREMIUM multistage pump with accessories due to the high hydraulic parameters obtained is designed for supplying pressurized water to residential buildings, multi-family houses, small farms and increasing the pressure in the installation.
They can also be successfully used in industrial plants, irrigation systems and technological processes. In combination with a diaphragm tank (optimally from 50 to 300 liters) it forms a complete hydrophore set.
MH 1300 is a self-priming pump, in the case of the first start, it is enough to flood the body with water and the pump will create a vacuum to facilitate the suction of water, provided that the water surface in the spring is at a depth not lower than 8m from the place of the pump.
Parameters:
Maximum capacity: 100 l/min
Maximum lifting height: 55 m
Motor power: 1.45 kW
Voltage: 400 V
Pressure connection: 1'' x 1''
Specifications:
- Maximum water temperature: 35°C
- Protection: IP 44
Material execution:
- Pump shaft: Stainless steel
- Impellers: Stainless steel
- Pressure housing: cast iron
- Suction body: cast iron
Specyfikacja
Status | New |
---|---|
Pump type | Surface |
Engine power | 1450 |
Brand | OMNIGENA |
EAN (GTIN) | 5907761106659 |
Manufacturer's code | MH 1300INOX PREMIUM 400V with accessories |
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent