WELCOME
TO OUR STORE
HYDROPHORE PUMP JET 100A(A) WITH ACCESSORIES 230V IBO
Gross
zł390.27
Sold: 2Gross
0/5
➡️ The JET 100A(a) pump is made of cast iron (pump housing and suction-discharge housing), making it resistant to corrosion and loads.
➡️ The device is lightweight, so it can be carried freely.
➡️ The device is lightweight, so it can be carried freely.
➡️ In addition, assembly and disassembly is quick and simple.
➡️ The operation of the pump is intuitive and does not cause problems.
➡️ The device has a suction and pressure connection with a diameter of 1 inch.
➡️ Proper operation is a guarantee of long-term reliability.
➡️ The pump operates with a capacity of up to 60 l/min, lifts water to a height of up to 50 meters and has a suction capacity of 8 meters.
Share on:
➡️ The most popular group of pumps and hydrophores.
➡️ The device is lightweight, so it can be carried freely.
❇️ pressure switch
❇️ Pressure gauge
❇️ five-way discharge
❇️ power cable with plug TECHNICAL DATA:
✳️ Maximum capacity [l/min] : 60
✳️ Maximum lifting height [m] : 50
✳️ Max. pressure [bar] : 4
✳️ Maximum suction depth [m] : 8
✳️ Voltage [V] : 230
✳️ Rated motor power [kW] : 1,1
✳️ Suction connection : DN25 (1")
✳️ Discharge connection : DN25 (1")
✳️ Number of rotors : 1
✳️ Weight [kg] : 15
✳️ Length [cm] : 46
✳️ Width [cm] : 20
✳️ Height [cm] : 20
➡️ The JET pump is a centrifugal, single-stage, self-aspirating pump, equipped with a system that increases the suction capacity thanks to the use of a venturi tube.
➡️ It will work at home, in a summer house, in a workshop, on a plot, in the garden and in a small enterprise. The device is recommended for working with a hydrophore and independently.
➡️ The JET 100A(a) pump is made of cast iron (pump housing and suction-discharge housing), making it resistant to corrosion and loads.➡️ The pump housing is made of durable cast iron.
➡️ The IBO JET 100A(a) pump is a single-stage pump with a single-phase motor with a power of 1.1 kW for pumping clean, cold water.
➡️ The IBO JET 100A(a) pump is a single-stage pump with a single-phase motor with a power of 1.1 kW for pumping clean, cold water.
➡️ The device can be mounted both in wells and in freshwater tanks.
➡️ It will work at home, in a summer house, in a workshop, on a plot, in the garden and in a small enterprise. The device is recommended for working with a hydrophore and independently.
➡️ The device is lightweight, so it can be carried freely.
➡️ In addition, assembly and disassembly is quick and simple.
➡️ The operation of the pump is intuitive and does not cause problems.
➡️ The device has a suction and pressure connection with a diameter of 1 inch.
➡️ Proper operation is a guarantee of long-term reliability.
➡️ The pump operates with a capacity of up to 60 l/min, lifts water to a height of up to 50 meters and has a suction capacity of 8 meters.
Pump with hydrophore equipment:❇️ pressure switch
❇️ Pressure gauge
❇️ five-way discharge
❇️ power cable with plug TECHNICAL DATA:
✳️ Maximum capacity [l/min] : 60
✳️ Maximum lifting height [m] : 50
✳️ Max. pressure [bar] : 4
✳️ Maximum suction depth [m] : 8
✳️ Voltage [V] : 230
✳️ Rated motor power [kW] : 1,1
✳️ Suction connection : DN25 (1")
✳️ Discharge connection : DN25 (1")
✳️ Number of rotors : 1
✳️ Weight [kg] : 15
✳️ Length [cm] : 46
✳️ Width [cm] : 20
✳️ Height [cm] : 20
Specyfikacja
Status | New |
---|---|
Engine power | 1100 |
Brand | IBO DAMBAT |
EAN (GTIN) | 5903887213523 |
Manufacturer's code | 5903887213523 |
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent