WELCOME
TO OUR STORE
FLEXIBLE HOSE CONNECTION GW 1'' GZ 80cm HIGH TEMPERATURE +110°C DN25 PN10 PERFEXIM PHA-9150
Gross
zł61.16
Sold: 2Gross
ADVANTAGES
✅Wide range of applications
✅ operating parameters and application supported by Technical Approval AT-15-9600/2016
✅ the functional properties of the product confirmed by tests in an independent, reputable accredited laboratory
✅ possibility of operation at a temperature of +110°C
✅possibility of operation at pressures up to 12 bar (*for DN8, DN13, DN18)
✅ approved for contact with drinking water - certificate of the National Institute of Hygiene
✅ possibility of operation in installations filled with 50% glycol solution
✅very high quality of workmanship
✅ The connecting cables are characterized by very high resistance to water hammers. When tested to change the pressure in 200 cycles from 5 to 50 bar, they do not show deformation, cracks or other undesirable damage and still maintain tightness
✅ After being subjected to a maximum pressure test of 150 bar under laboratory conditions, the tubing showed strength and tightness
✅Thanks to the use of a 1.4301 stainless steel braid, the cables are resistant to corrosion, which allows them to be freely used outside the building or in cooling systems, even when steam precipitates and the dew point is exceeded
✅gaskets are made of high-quality EPDM material resistant to extreme weather conditions or mechanical effects
✅ The tips are characterized by high strength due to the use of a thickened wall. The bits are made of high-quality brass types: CW617N, CW614N, CW602N and CW609L
✅ Thanks to the well-thought-out design and long threads, it is possible to make safe and solid joints
✅The clamps are made of 1.4301 stainless steel sleeve, which gives the maximum, confirmed by strength tests at the hose connection
with tip
✅ Thanks to the flexible design and a wide range of lengths and connection terminals, almost any connection can be made
MATERIALS:
✅Nut - Material: CW614N brass with nickel plated
✅End Bit for Nut - Material: Brass CW617N
✅Male threaded end - Material: CW617N brass with nickel plated exterior
✅90⁰ elbow - Material: Brass CW602N or CW609L with nickel plated exterior
✅Wire exterior fence - Material: Corrosion-resistant steel grade 1.4301
✅Collet - Material: Corrosion-resistant steel grade 1.4301
✅Hose (line pipe) - Material: EPDM rubber compound
✅Flat & O-Ring Gaskets - Material: EPDM Rubber Compound
Share on:
Connecting cables are the basic elements that ensure the connection of fittings and installation equipment. Due to the growing expectations and needs of customers, the offer includes a wide range of flexible connection cables, guaranteeing high tightness and durability of the products. Perfekt system connection pipes are synonymous with safe water installations.
USE
Flexible connection cables are designed for connecting fittings and installation equipment and can be used in
in the following installations: central heating, hot and cold water supply (including drinking water), cooling filled with 50% glycol solution.
Due to the corrosion resistance requirements, flexible conduits, can be used indoors and outdoors,
in environments with atmospheric corrosivity category 1÷3 according to PN-EN 1456:2009 - (TEST: 5% concentration of sodium chloride at 35°C
within 96h - after the test there were no traces of corrosion on the metal parts of the wires).
Flexible connection cables are available in a wide range of connections from M10 to G11/4,
with straight connections with internal and external threads, as well as with an elbow with an internally threaded nut. This gives you a lot of options for configuration and selection of the right connection cable. Connecting cables can be installed in vertical, horizontal and slanted installations in any position; However, during installation, it is important to remember to follow the rules. In order to avoid mistakes, care should be taken to:
✅during and after installation, do not allow the axial twist of the cable
✅no tensile force has been applied (due to the use of a cable that is too short)
✅no creases are formed when routing the cable (ensure smooth radii when routing the cable)
ADVANTAGES
✅Wide range of applications
✅ operating parameters and application supported by Technical Approval AT-15-9600/2016
✅ the functional properties of the product confirmed by tests in an independent, reputable accredited laboratory
✅ possibility of operation at a temperature of +110°C
✅possibility of operation at pressures up to 12 bar (*for DN8, DN13, DN18)
✅ approved for contact with drinking water - certificate of the National Institute of Hygiene
✅ possibility of operation in installations filled with 50% glycol solution
✅very high quality of workmanship
✅ The connecting cables are characterized by very high resistance to water hammers. When tested to change the pressure in 200 cycles from 5 to 50 bar, they do not show deformation, cracks or other undesirable damage and still maintain tightness
✅ After being subjected to a maximum pressure test of 150 bar under laboratory conditions, the tubing showed strength and tightness
✅Thanks to the use of a 1.4301 stainless steel braid, the cables are resistant to corrosion, which allows them to be freely used outside the building or in cooling systems, even when steam precipitates and the dew point is exceeded
✅gaskets are made of high-quality EPDM material resistant to extreme weather conditions or mechanical effects
✅ The tips are characterized by high strength due to the use of a thickened wall. The bits are made of high-quality brass types: CW617N, CW614N, CW602N and CW609L
✅ Thanks to the well-thought-out design and long threads, it is possible to make safe and solid joints
✅The clamps are made of 1.4301 stainless steel sleeve, which gives the maximum, confirmed by strength tests at the hose connection
with tip
✅ Thanks to the flexible design and a wide range of lengths and connection terminals, almost any connection can be made
MATERIALS:
✅Nut - Material: CW614N brass with nickel plated
✅End Bit for Nut - Material: Brass CW617N
✅Male threaded end - Material: CW617N brass with nickel plated exterior
✅90⁰ elbow - Material: Brass CW602N or CW609L with nickel plated exterior
✅Wire exterior fence - Material: Corrosion-resistant steel grade 1.4301
✅Collet - Material: Corrosion-resistant steel grade 1.4301
✅Hose (line pipe) - Material: EPDM rubber compound
✅Flat & O-Ring Gaskets - Material: EPDM Rubber Compound
Specyfikacja
| Status | New |
|---|---|
| Brand | PERFEXIM |
Comments (0)