WELCOME
TO OUR STORE
PELLET BOILER SPACE HEATER WITH WATER JACKET HYDROPELL 8KW DEFRO + ⚠️FREE SHIPPING! ⚠️
Gross
zł8,613.01
Sold: 24Gross
0/5
PELLET BOILER SPACE HEATER WITH WATER JACKET HYDROPELL 8KW DEFRO + ⚠️FREE SHIPPING! ⚠️
Share on:
The Hydropell device, classified as a local space heater, is excluded from the subsidy in accordance with the Regulations of the Clean Air Programme
HYDROPELL – Pellet space heater with the possibility of preparing domestic hot water. Comfortable and easy to use.
♻️ An ideal stove to replace old stoves and coal stoves installed directly in utility rooms.
♻️ The heat output is additionally given off to the room by convection.
♻️ High energy efficiency class A++ with Ecodesign certificate.
♻️ High nominal efficiency of up to 95%.
♻️ The ceramic igniter regulates the process of automatic operation of the stove.
♻️ Controller for central heating and hot water pump, equipped with a remote control for remote operation.
♻️ Its compact size, together with the integrated pellet tank, makes it suitable for any part of the room.
♻️ It has a factory-built diaphragm pressure vessel, a central heating pump and an exhaust fan stabilizing the chimney draught while eliminating problems related to flue gas collection.
♻️ Closed combustion chamber equipped with oxygen measurement sensor (pressure switch).
♻️ Sensor and hot water module as standard.
♻️ Suitable for burning pellets with a diameter of 6 mm.
⚡ Energy efficiency class - A++
⚡ Heat exchanger made of certified high-quality steel
⚡ High thermal efficiency in the range of 94.2 to 95.6% due to increased heat recovery from the flue gas
⚡ TIEMME controller. Operation of the central heating pump, automatic ignition process. Operation of the changeover valve for hot water heating, hot water heating mode. Works with room controller or indoor temperature sensor
⚡ The device is adapted as standard for installation in a closed system, provided that the protection devices are installed in accordance with the DTR of the device
⚡ Built-in diaphragm vessel
⚡ Swirl system to increase heat recovery from the energy produced
⚡ Central heating pump is included in the device
⚡ Self-ignition fuel system
⚡ The furnace chamber is equipped with a dump pellet burner adapted to biomass combustion. The hearth is made of high-quality heat-resistant steel
⚡ Exhaust fan eliminating the problem with chimney draught and stabilizing the operation of the device
TIEMME NG01 HYDRO
CONTROLLER FEATURES:
- Simple and intuitive controls
- Operation of the central heating pump
- Automatic ignition process
- Operation of the diverter valve for hot water heating
- DHW heating mode
- Can be used with a room controller or an outdoor temperature sensor
- Exhaust gas temperature sensor
- Ambient probe
- Removable connectors
- Control panel with anti-static cover
- Pellet Level Sensor Operation
⚙️ Nominal power kW 10.4
⚙️ Heat output of water circuit kW 8.5
⚙️ Heat output kW 1.9
⚙️ Efficiency for nominal power % 94.9
⚙️ Efficiency for minimum power % 96.2
⚙️ Seasonal Energy Efficiency % 90.4
⚙️ Central heating emission at 13% O2 % 0.0101
⚙️ Exhaust gas temperature °C 81.4
⚙️ Weight kg 135
⚙️ Minimum chimney draught Pa 12
⚙️ Flue diameter mm 80
⚙️ Power supply 230 V
⚙️ Maximum electrical power consumption W 380
⚙️ Fuel tank capacity kg 15
⚙️ Water capacity l 22
⚙️ Diaphragm vessel capacity l 5
⚙️ Working pressure bar 1.5
Dimensions (mm)
A 525
B 887
C 686
D 198
E 270
F 857
G 400
H 110
I 119
J 50
K 80
L 136
M 186
N 169
O 93
P 120
R 128
Specyfikacja
Status | New |
---|---|
Brand | DEFRO |
Power in KW | 8 |
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent