❇️ ARM ProClick actuators are distinguished by their unique features and attractive design. 

⏩ A double-sided scale on the knob determines the degree of valve opening. 

⏩ Large LEDs indicate the direction of rotation of the valve. 

⏩ Manual rotation of the valve is possible thanks to the use of an easy-to-use clutch in the form of a button. 

⏩ ARM ProClick actuators are maintenance-free due to the use of extremely adhesive gear grease.

⏩ The actuators are supplied with a 2 m long electrical cable with clearly colour-coded conductors . 

⏩ The cable is connected to the actuator via a plug secured with a lid. 

⏩ This makes it possible to mount the actuator on the valve without connecting the control cable. 

⏩ The ARM ProClick actuator can be mounted on ARV ProClick mixing valves without tools or additional parts or adapters.

⏩ With the right adapters , ARM ProClick actuators can also be mounted on valves of the previous generation of ARVs and valves from other manufacturers. 

⏩ Depending on the design of the valves, ARMProClick actuators can be mounted on the valve using the ProClick mechanism or in the traditional way, using mounting and counter screws.

❇️ USE

⚡ ARM ProClick 1434310 electric actuators are designed to control rotary mixing valves. Depending on the version, they have a torque of 6 or 15 Nm and a swivel range of 90°. It is also possible to operate the actuator in manual mode using a rotary knob.

⚠️INNOVATIVE ProClick ⚠️ system

✴️ The biggest advantage of the new generation of ARV ProClick mixing valves and ARM ProClick electric actuators is the innovative ProClick system.

✴️ With it, installing the new ARM ProClick actuator on the new ARV ProClick valve comes down to two simple steps:

1️⃣ Remove the knob from the ARV ProClick valve.

2️⃣ Putting an ARM ProClick actuator on it.

⚡ And all this without any additional elements or the use of tools. Just like that! ⚡

✳️ The knob and the blue restriction ring are mounted on the valve with a latch. 

✳️ Underneath the knob there is always a screwed adapter for ARM ProClick electric actuators. 

✳️ The actuator is mounted by sliding it over the valve with the adapter in a position convenient for the user. 

✳️ To slide the actuator off the valve, all you have to do is press and hold the locking mechanism release button.

⚡ Refreshed design

✔️ For more convenient manual operation, the knobs on the ARV ProClick rotary mixing valves and the ARM ProClick electric actuators are larger than the previous generation.

✔️ They also have a rotating numerical scale, which is mounted with a latch.

c. LEDs - With the use of easy-to-read LEDs, the actuator signals its direction of rotation, which allows for quick diagnostics of its operation.  ⏩

d. Convenient Knob - A large knob with a clear setting indicator allows you to easily and precisely operate the actuator in manual mode. ⏩ 

f. Operating mode button - A simple to use button allows you to change the operating mode of the actuator from automatic to manual.   ⏩

e. Cable with detachable plug - The control cable is connected to the actuator housing by a plug. ⏩   This simplifies the installation of the actuator itself and the execution of electrical connections

✳️ DIAGRAM OF THE ACTUATOR MOUNTING ON THE PROCLICK VALVE

1️⃣ ARV ProClick Valve

2️⃣ Four ProClick attachment points

3️⃣ Flattening on the adapter

4️⃣ ProClick lever

5️⃣ ARM ProClick actuator

6️⃣ Indicator ring

7️⃣ Knob

8️⃣ Double-sided scale

⚠️ To mount the ARM ProClick actuator on previous generation ARV valves, the 1410110 connection kit is used (available in our other auctions or in the "buy in set" option)

⏩ A. Marker

⏩ B. Valve stem adapter

⏩ C. Actuator locking screw

✴️ The actuator can be mounted in one of 4 positions.

⏩ The blue ring indicator should be facing up. 

⏩ If, after attaching the actuator to the valve, the element is in a different position, pull out the knob, remove the blue ring and put it back on with the upward pointing element. 

⏩ The blue ring has a structural element on the inside that allows it to be pryed out with a flathead screwdriver.

✴️ 200 mm (8") adjustable wrench with extended jaw spacing (compared to standard jaws of this size).

⏩ Made of chromium-wanda steel (CR-V), the chromium used guarantees the steel's resistance to corrosion, oxidation, abrasion and high strength at high temperatures, while the addition of vanadium also affects the resistance to high temperatures and non-deformation.

⏩ The laser-etched measuring tape guarantees readability without worrying about scale blurring.

⏩ The handle is covered with TPR plastic - resistant to oil and grease.

⏩ A wrench with an eyelet to hang on a hook, e.g. in a workshop.

⏩ Premium quality .

⚡️ TECHNICAL SPECIFICATIONS:

⏩ Wrench Type - Socket

⏩ Steel - Chrome Wanda (CR-V )

⏩ Length - 8" (200 mm)

⏩ Size Range - 0-39 mm

⏩ Weight — 298 g

⭐⭐⭐⭐⭐

⚡️ PRODUCT FEATURES:

✔️ Extended jaw spacing range (compared to standard jaw spacing in this size)

✔️ Made of chrome wanda steel (CR-V). The chromium used guarantees the steel's resistance to corrosion, oxidation, abrasion and high strength at high temperatures, while the addition of vanadium also affects the resistance to high temperatures and does not deform

✔️Laser-etched measuring tape guarantees legibility without worrying about scale blurring

✔️ TPR handle – resistant to oil and grease

✔️ Finished with an eyelet for hanging on a hook, e.g. in the workshop